SERVICE MANUAL
Model: BFQ50
12
Issue 2012-12-27
Rev.
Ref1212S006V0
Chapter 5 Control and display system
5-1. Control panel
Freezing temperature selection is made by setting the control from Min to
Max (coldest).
If we want colder or warmer temperatures, adjust the control one step at a
time.
Allow several hours after each one-step adjustment for the freezer
temperature to stabilize.
5-2. Starting the Freezer
1. Clean the inside of the freezer with a mild solution of baking soda and
water
2. Connect cord to power outlet.
3. On models with a Temperature Monitor or High-Temp Alarm Switch, set
the switch to the Min position.
4. Make sure the temperature control is set at 4.
5. Allow freezer to operate for at least four hours before placing food inside.
6. On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the ON
position.
To Next Page
Loading...
Need help?
General
