27
1. Cleaning the Surface
Wipe off the dust from the body of the dryer and the surface of the main
control panel using a soft cleaning cloth. Remember not to use any organic
solvent or corrosive agent in cleaning to avoid damage to the machine.
2. Cleaning the Lint Filter
To ensure good ventilation during drying,
the lint filter must be cleaned once every drying
program is complete.
Open the door to remove the lint filter from
the machine. Clean off the lint on the filter
and handle using a wet towel. After cleaning,
put the filter back in place.
3. Cleaning the Drum
After the dryer has operated for some
time, fabric caring agents or calcium
contained in the water will form an
almost invisible segregation layer on
the inside of the drum.
This makes the dryer not able to reliably
and accurately identify the dryness of the
laundry. So the inside of the drum,
especially the stainless steel pieces on
the blades, must be cleaned regularly
by a wet cloth.
CLEANING AND MAINTENANCE
EnglishEnglish
To Next Page
Loading...
Need help?
General
