7
2.2 To Use the Menus
1. Press the Menu button to display or close the main menu.
2. Use the Navigation Ring to move around to select, adjust or confirm an item in the OSD (On Screen Display)
menu.
Press the Menu button to enter the main OSD. Adjust the items including Video menu,Audio menu, Feature menu,
Channel menu, and VGA menu. However, some function items in the menus may only be enabled in the particular
source modes.
CHANNEL MENU
The Channel menu in TV mode shows as below.
1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2. Channel Strength: Show the intensity of the received DTV signal.
3. Auto CH Search: Automatically scan all NTSC / ATSC TV channels and then store in the channel table. In channel
scan process, the OSD can display the number of channels which had been found.
4. Add on CH Search: Add channels which are new found.
5. Channel List: Show the Channel List. User can edit (add/delete) the channel numbers.
6. Channel Labels: Show the NTSC / ATSC TV Channel Labels menu for user modifying channel labels specifically.
7. FAV Channel Setting: Show the Favorite Channel List. User can edit (add/delete) the favorite channels.
VIDEO MENU
The Video menu in most source modes shows as below. It provides several video adjustment items for user fine
tuning the video display.
Only in VGA source mode, the Video menu simply provides Picture mode, Color Temp, Backlight, Aspect Ratio,
Preset items.
1. Picture Mode: Adjust the best picture appearance from selecting the preset value of Vivid, Standard, Eco, Movie,
or Personal.
2. Brightness: Video brightness adjustment, the tuning range is 0 ~ 100.
3. Contrast: Video contrast adjustment, thetuning range is 0 ~ 100.
4. Sharpness: Video sharpness adjustment,the tuning range is 0 ~ 100.
5. Color: Video color chroma adjustment,the tuning range is 0 ~ 100.
6. Tint: Video tint adjustment, the tuning range is R50 ~ G50.
7. Color Temp: Three color temperature modes. (Normal / Warm / Cool)
8. Noise Reduction: Gives four NR effect degrees, such as: Low, Mid, High and Off.
9. Adaptive Contrast: Choose On or Off to adjust the gamma after analyzing the input signal automatically.
10. Backlight: Backlight strength adjustment,the tuning range is 0 ~ 30.
11. Aspect Ratio: Choose the display aspect: Normal, Zoom1, Wide, Zoom2, or HDMI PC mode.
12. Preset: Restore the default video settings.
To Next Page
Loading...
Need help?
General
