Haier HLP24E User Manual

5
INSTALLATION INSTRUCTIONS
TOOLS NEEDED
Ţ
Pliers
Ţ
Wrench
Ţ
Flat-blade Screwdriver
Ţ
Measuring Tape
Ţ
Carpenter’s Level
PARTS SUPPLIED
Ţ
Drain Hose Clamp
Ţ
Drain Hose Hook
Ţ
Drain Hose
Ţ
Water Hoses (1)
Ţ
User Manual
LOCATION REQUIREMENTS
Ţ
Ţ
Ţ
A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
Ţ
Do not install on carpeting.
Ţ
The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of
power cord on the back of the washer.
Ţ
Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and
cold connections on the washer.
Ţ
A water heater must supply hot water with a temperature of at least 120°F
(49°C).
Ţ
The water pressure should be between 20 and 100 psi (138 and 690 kPa).
WARNING
Do not install or operate the washer where it will be exposed to
temperatures below 32°F (0°C). Water remaining in the washer will
freeze and cause damage to the washer.

Haier HLP24E Specifications

General

Door hinge	Up
Drum volume	42.4 L
Control type	Buttons
Display type	LED
Loading type	Top-load
Drum material	Stainless steel
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
AC input voltage	120 V
AC input frequency	60 Hz
Energy consumption washing per cycle	- kWh
Drum capacity	- kg
Spin-drying class	-
Maximum spin speed	800 RPM
Noise level (spin)	- dB
Load balancing system	No
Number of washing programs	3

Weight and Dimensions

Depth	510 mm
Width	500 mm
Height	901.7 mm
Weight	19504 g