Hardi BL Series User Manual

22
Assembly
1. Fit pulsation damper and pressure hose B.
2. Fit suction damper and suction hose A.
NOTE: Use O-rings where indicated.
Lubricate them before assembly.
Where O-rings are not indicated,
use sealing tape.
3. Operating unit
and distribution
valve are assem-
bled and bolted to
rack.
Screw pressure gauge
on to operating unit. Do not
overtighten. See back of
gauge.
Remember to pierce casing
after installation.

Hardi BL Series Specifications

General

Brand	Hardi
Model	BL Series
Category	Paint Sprayer
Language	English