2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Rear Panel Connections
10 Main Remote Control Functions
14 Zone II Remote Control Functions
16 Installation and Connections
16 Audio Connections
16 Video Connections
17 HDMI Connections
18 SCART A/V Connections
20 System and Power Connections
21 Speaker Selection
21 Speaker Placement
23 System Configuration
23 First Turn On
23 Using the On-Screen Display
23 System Setup
24 In/Out Input Setup
25 Audio Setup
26 Surround Setup
27 Night Mode Settings
28 Using EzSet/EQ
30 Manual Setup
31 Speaker Setup
33 Delay Settings
34 Output Level Adjustment
35 Additional Input Adjustments
36 Operation
36 Surround Mode Chart
38 Basic Operation
38 Source Selection
38 6/8-Channel Direct Input
39 Controls and Use of Headphones
39 Surround Mode Selection
40 Digital Audio Playback
40 Dolby Digital
40 DTS
40 PCM Audio Playback
41 Selecting a Digital Source
41 Digital Bitstream Indicators
41 USB Playback
42 Speaker/Channel Indicators
42 Night Mode
43 Using The Bridge™
43 Tape Recording
43 Front Panel Input/Output Connections
44 Output Level Adjustment with Source
44 EzSet/EQ Operation on/off Signals
44 Dim Function
44 Memory backup
45 Advanced Features
45 Front Panel Display Fade
45 Display Brightness
45 Turn-On Volume Level
46 Semi-OSD Settings
46 Full-OSD Time Out Adjustment
46 DMP The Bridge Auto Power
47 Multiroom Operation
48 Infrared Output Selection
49 Tuner Operation
49 Basic Tuner Operation
49 Station Selection
49 Preset Tuning
49 RDS Operation
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
EXAMPLE – (Synchro type) indicates a message that is displayed on the remote control’s LCD screen
1
– (number in a square) indicates a specific front-panel control
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
A – (letter in an oval) indicates a button on the Zone II remote
49 RDS Tuning
49 RDS Display Options
50 Program Search
51 Programming the Remote
51 Configuring the Remote
51 Preprogrammed Code Entry
52 Automatic Code Entry
52 Learning Commands
53 Learning Codes for an Input Selector
53 Device Priority
54 Macro Programming
56 Punch-Through Configuration
57 Renaming
59 Resetting the Remote
59 Backlight Options
61 Troubleshooting Guide
61 Processor Reset
62 Appendix
65 Technical Specifications
Declaration of Conformity
We, Harman Consumer Group, Inc.
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described in
this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3.1995+A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group, Inc.
09/06
The appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from the
illustrations in this manual. Whether the text appears in all uppercase or upper- and lowercase
characters, performance and operation remain the same.
To Next Page
Loading...
Need help?
General
