8
5.2 Bluetooth connection
Through Bluetooth, connect the soundbar with your Bluetooth
device, such as a smartphone, tablet and laptop.
Settings Bluetooth
Bluetooth
DEVICES
JBL Bar 2.0 Plus
Now Discoverable
Connected
< 10 m / 33 ft
Connect a Bluetooth device
1. Press to switch on (See “Power-on/Auto standby/Auto
wakeup” in the “PLAY” chapter).
2. To select the Bluetooth source, press on the soundbar or
on the remote control.
→ Ready for pairing: The status indicator ashes blue.
3. On your Bluetooth device, enable Bluetooth and search for
“JBL Bar 2.0 Plus” within three minutes.
→ Connected: The status indicator lights up solid blue. A
conrmation tone is heard.
To reconnect the last paired device
Your Bluetooth device is retained as a paired device when the
soundbar goes to standby mode. Next time you switch to the
Bluetooth source, the soundbar reconnects the last paired
device automatically.
To connect to another Bluetooth device
3S
1. In the Bluetooth source, press and hold on the soundbar or
on the remote control until the status indicator ashes blue.
→ The previously paired device is cleared from the soundbar.
→ The soundbar enters the Bluetooth pairing mode. The
status indicator ashes blue.
2. Follow Step 3 under “Connect a Bluetooth device”.
• If the device has ever been paired with the soundbar, rst
unpair “JBL Bar 2.0 Plus” on the device.
Notes:
– The Bluetooth connection will be lost if the distance between the
soundbar and Bluetooth device exceeds 33 ft (10 m).
– Electronic devices may cause radio interference. Devices that
generate electromagnetic waves must be kept away from the
soundbar, such as microwaves and wireless LAN devices.
To Next Page
Loading...
Need help?
General
