1010
TV (HDMI eARC)
HDMI (eARC)
HDMI OUT
(TV ARC)
HDMI IN
HDMI OUT
*
TV
1. Connect the soundbar with the connector
on your TV by using the supplied HDMI cable.
• On your TV, check that HDMI-CEC and HDMI ARC have
been enabled. Refer to the owner’s manual of your TV for
more information.
2. Use an HDMI cable (eARC compatible, V2.0 or later) to connect
your TV with your digital device, such as a streaming device,
set-top box, DVD/Blu-ray player or game console.
• On your digital device, check that HDMI-CEC has been
enabled. Refer to the owner’s manual of your digital
device for more information.
• On your TV and digital device, select “Bitstream” or “Raw
data” in the audio output settings for the best Dolby
Atmos experience.
3. To play audio from the digital device connected to your TV,
select
on the remote control.
OPTICAL
HDMI IN
HDMI OUT
OPTICAL
OPTICAL
*
TV
NOTES:
− With the 4 up-firing speakers and the detachable surround speaker
design, the Dolby surround upmixer of the soundbar can expand the
legacy channel-based audio of Dolby Digital format, including 5.1 and
7.1 content, and provide an immersive 3D Atmos experience.
To Next Page
Loading...
Need help?
General
