1
Name of the cellphone provider, with
which the SIM card of the connected
2
Name of the connected cellphone.
3
: Display of an active Bluetooth®
connection.
: Charge state of the connected
cellphone.
: Signal strength of the currently received
cellular network station.
Displays and functions in the PHONE
main menu
⇒Fig. 13 Displays and functions
⇒Fig. 13 Displays and functions
Open call logs of the connected cellphone
⇒Page 30.
Open the telephone directory of the
connected cellphone ⇒Page 29.
The language selection mode is retrieved
⇒Page 29.
Couple and connect cellphone with radio.
Take or reject a call
Fig. 14 Incoming call.
First read and observe the safety notes
on pa
ge 3 and the introductory information
on page 27.
An incoming phone call is displayed in the middle
o
f the screen by the phone number of the caller
⇒Fig. 14
2 .
If the phone number of the caller is saved in the
telephone directory, the name of the caller is
displayed.
When you take a call, the screen display is switching
to call mode ⇒Page 28.
Displays and functions
⇒Fig. 14 Displays and functions
1
Display of incoming call.
2
Display of the phone number or saved
name.
Press the function key next to the display to
mute the ring tone during a call
. Press the
function key again to cancel muting of the ring
tone.
Press the function key of the display to
take a call.
P
ress the
function key of the display to
reject a call.
During a phone call
Fig. 15 During a phone call.
First read and observe the safety
not
es on page 3 and the
introductory information on page 27.
During a phone call, the following
28 Function description
To Next Page
Loading...
Need help?
General