Extended Declaration of Incorporation
EC Machinery Directive 2006/42/EC
The manufacturer: Motorenfabrik Hatz GmbH & Co.KG
Ernst-Hatz-Straße 16
94099 Ruhstorf a. d. Rott (Germany)
hereby declares that the incomplete machine: product description: Hatz diesel engine
Type designation and as of serial number:
1B20=10034; 1B20V=11124; 1B20R=14413
1B30=10129; 1B30V=11220; 1B30E=18210; 1B30VE=18310
1B40=11019;
1B50=12416; 1B50V/W=12616; 1B50E=18410
satisfies the following basic safety and health protection requirements in acc. with Annex I to the
above-mentioned Directive.
- Annex I, General principles no. 1
- No. 1.1.2., 1.1.3., 1.1.5., 1.2.1., 1.2.2., 1.2.3., 1.2.4.1., 1.2.4.2., 1.2.6, 1.3.1., 1.3.2., 1.3.3., 1.3.4
.,
1.3.7., 1.3.9., 1.4.1., 1.5.1., 1.5.3., 1.5.8., 1.5.9., 1.5.10, 1.5.11, 1.6.1., 1.6.2., 1.6.4., 1.7.
All relevant basic safety and health protection requirements down to the interfaces described
in the manual for diesel engine
in the enclosed data sheets
in the enclosed technical documents
have been complied with.
The following standards have been applied (fully or in part):
- EN 1679-1: 092011 - EN ISO 12100: 032011 - EN ISO 13857: 062008
- EN 60204-1: 062007
The manual for the diesel engine has been attached to that of the incomplete machine and the
Assembly Instructions have been provided to the customer electronically together with the order
confirmation.
The special technical documents in acc. with Annex VII B of the Directive 2006/42/EC have been
prepared. If necessary, I will submit the above-mentioned special technical documents in electronic
form to the competent authority.
The above-mentioned special technical documents can be requested from:
Wolfgang Krautloher, address, see manufacturer
Commissioning is prohibited until it has been established, where applicable, that the machine into
which the above-mentioned incomplete machine is to be incorporated, satisfies the provisions of the
Machinery Directive.
04/11/2020
Date Maximilian Eder Dr.-Ing. Simon Thierfelder
Series manager air-cooled engines Chief Technical Officer - CTO