1B20, 1B30, 1B40, 1B50 Maintenance
HATZ
61Manual
Step Activity
2 In models with a cyclone precleaner, also check and if neces-
sary clean the intake area (2) in addition to step 1.
Check that the dust outlet opening (3) is clear and clean it if
necessary.
3 In models with an oil bath filter, also check and if necessary
clean the intake area (4) in addition to step 1.
8.2.4 Change the engine oil
This section contains the following subsections:
▪ Draining the engine oil
▪ Filling the engine oil
Safety notes
CAUTION
Danger of burns.
When working on the engine there is a danger of burns from hot
oil.
▪ Wear personal protective equipment (gloves).
CAUTION
Danger of environmental damage from spilled used oil.
Used oil is water-polluting.
▪ Do no allow it to enter the ground water, water bodies, or
sewage system.
▪ Collect the used oil and dispose of it according to local envi-
ronmental regulations.
CAUTION
Danger of injury
Prolonged contact with engine oil can lead to irritation of the
skin.
▪ Wear safety gloves.
▪ If there is contact with the skin, thoroughly wash the af-
fected areas of the skin with soap and water.
To Next Page
Loading...
Need help?
General
