Safety 2L41C, 2M41, 2M41Z
12
HATZ
Operator’s Manual
3.2 Safety notes
3.2.1 Operational safety
Introduction
This chapter contains all of the important safety instructions for personal pro-
tection and for safe and reliable operation. Additional, task-related safety in-
structions can be found at the beginning of each chapter.
DANGER
Danger to life, danger of injury or danger of property dam-
age due to failure to comply with this manual and the safety
instructions contained therein.
▪ As the operator of the machine, you must ensure that all
people working on the machine are familiar with the content
of this manual.
▪ Before working on the machine, read this manual carefully,
paying special attention to the safety notes.
▪ Fulfill all required safety conditions before working on the
machine.
▪ Follow all general safety instructions as well as the specific
task-related safety instructions contained in the individual
chapters.
Using the machine
▪ Only operate the machine for the purposes described in chapter 3.1.1 In-
tended use and foreseeable misuse, page 7.
Compliance with other regulations
▪ Adhere to the applicable accident prevention regulations of the trade asso-
ciations.
▪ Comply with the regulations concerning the minimum safety and health re-
quirements for the use of work equipment by workers at work.
▪ In addition, local safety, accident prevention and environmental regula-
tions also apply when operating the machine.
Personal protective equipment
During operation and maintenance of the machine, personal protective
equipment must be available and must be used if necessary. The required
personal protective equipment is specified in the descriptions of the operat-
ing steps.
To Next Page
Need help?
General
