Maintenance 2L41C, 2M41, 2M41Z
78
HATZ
Operator’s Manual
8.2.14 Changing the oil filter
Safety note
CAUTION
Danger of burns.
When working on the engine there is a danger of burns from hot
oil.
▪ Wear personal protective equipment (gloves).
▪ Collect the used oil and dispose of it according to local envi-
ronmental regulations.
Overview
1 Oil filter
2 Strap wrench
3 Gasket
Procedure
Step Activity
1 Release the oil filter (1) with a strap wrench (2) and quickly un-
screw it or pull it out.
▪ HATZ order no. for strap wrench: 620 307 01.
2 Dispose of the old filter in accordance with local environmental
regulations.
3 Wipe spilled engine oil out of the oil baffle.
4 Lightly oil the gasket (3) of the new oil filter.
5 Screw in the oil filter and tighten it by hand.
To Next Page
Loading...
Need help?
General
