Operation and use 2L41C, 2M41, 2M41Z
36
HATZ
Operator’s Manual
7.4 Setting the speed control
Overview
Procedure
Step Activity
1 Depending on the situation, place the speed control
lever in either the "1/2" or "Start" position.
NOTICE
A lower speed setting will cause less exhaust smoke when start-
ing.
7.5 Starting the engine
Starting options
The standard equipment of the engine is an electric start mechanism. A
hand starter can be installed as an option.
If possible, separate the engine from the machine being driven by uncou-
pling it. Always switch the machine into idle mode.
Safety notes
DANGER
Danger to life from inhaling exhaust gases.
Toxic engine exhaust gases can lead to loss of consciousness
and even death in closed-off and poorly ventilated rooms.
▪ Never operate the machine in closed-off or poorly ventilated
rooms.
▪ Do not breathe in the exhaust gases.
To Next Page
Need help?
General
