Hawking HWPS1UG User Manual

7.10 Wireless Configuration
If you wish to use the print server’s wireless LAN capabilities,
please set up the HWPS1UG print server through an Ethernet
connection before setting up the wireless connection. After
configuring the wireless LAN portion of your print server’s
settings, unplug your LAN Ethernet cable and restart the
HWPS1UG print server by unplugging the power cable from
the rear of the unit. If your wireless configuration does not
work, please plug in your Ethernet LAN cable again, restart the
print server, and configure the print server through Ethernet
until your wireless LAN settings are correct.
Double Click on the “Wireless” icon and the wireless
configuration window will be displayed.
If you use an access point or wireless router to access your
local network, you should select “Infrastructure Mode” to
connect your print server to the wireless LAN. If you do not

Hawking HWPS1UG Specifications

General

Brand	Hawking
Model	HWPS1UG
Category	Print Server
Language	English