1. MEM (Memory) Indicator - Indicates the unit is in Memory Dial Programming
mode or Memory Dialing mode.
2. REP (Repeat) Indicator - Indicates how many phone calls have been made
from the same telephone number.
3. NEW Indicator - Indicates the number of new caller ID data items that have not
been reviewed.
4. TOTAL Indicator - Indicates the total number of stored ID data items.
5. Arrow Indicators - Indicates which arrow button can be used.
6. PROG (Program) Indicator - Indicates the unit is in Programming mode.
7. Message (“ ”) Indicator - Indicates that mailbox in the central office has a
message. If you have subscribed to Voice Mail message service and you have
requested Visual Message Indication from your phone company, “ ” will
appear on the LCD screen when in the Standby mode.
8. VIP Indicator - Indicates that priority ringer has been set for the displayed
number.
9. Name/Number Indicator - Name and number of incoming call.
LCD BACK LIGHT
The LCD is back lit under the following conditions:
1. While receiving an incoming call (during ringing).
2. For 10 seconds, when the handset is picked up from the cradle.
3. For 10 seconds, when any button is pressed in the Programming mode, Caller
ID Review mode or Stored Number Review mode.
4. For 10 seconds, when any button is pressed in any mode other than those
listed above.
The LCD back light will go off 10 seconds after the Talk mode is terminated by
pressing the TALK button or immediately after the handset is placed in the base.
DISPLAY
To Next Page
Loading...
Need help?
General