2.9. Preparing for piling the stones
Removing of the supporting bars to pile the stones
Unscrew the bars' mounting screws (2 pcs).
Lift the support bar's locking plate up from its
normal position.
Lift off the support bars.
Pile stones up to the Helo marker.
Reinstall the support bars.
Install the support bars as above in the reversed order.
Pile the stones so that they cover the heating elements.
For specific instructions refer to section 2.4 Sauna heater stones.
Image 2
Installation and User Manual ROCHER DET
7
To Next Page
Loading...
Need help?
General
