5
English
Product appearance is for reference only
and may differ from the actual product.
Brief Description
The handheld thermal monocular camera is a
handheld device with functions of observation,
Wi-Fi hotspot, hot tracking, bi-spectrum image
fusion, laser distance measurement, and so on.
The high-sensitivity built-in thermal detector
provides you with clear view even in total
darkness.
The device is mainly applied to outdoor activities
such as hunting, searching and rescuing, hiking,
and travel.
The device can capture snapshots, record videos,
and set parameters by HIKMICRO Sight App after
being connected to your phone via hotspot.
Search the HIKMICRO Sight on App Store (iOS
System) or Google Play™ (Android System) to
download it, or scan the QR code to download and
install the App.
The frequency bands and modes and the nominal
limits of transmitted power (radiated and/or
conducted) applicable to this radio device are the
following:
Wi-Fi 2.4 GHz (2.4 GHz to
2.4835 GHz)
20 dBm
Appearance (Page 2 - A)
There are two types of handheld thermal
monocular cameras. The appearance descriptions
of the two types are shown below. Please take the
actual product for reference.
Buttons & Components
1
3
Measure the distance
with laser.
4 Power Key
mode/wake up the
device
5 Capture Key
Press: capture
Hold: trigger calibration
6
Measure
Key
distance with laser
7 Menu Key
Hold: enter/exit the
8 Wheel
Adjust the digital zoom;
select functions in
9
Type-C
Interface
with the power
adapter; connect the
device with your PC to
10 Eyepieces
View the target, and
adjust the diopter.
12 Indicator
Indicate the on/off
mode of the device.
Note:
Press the Measure Key/Capture Key and Menu Key
at the same time to start or stop recording.
Press the Power key, Measure Key/Capture Key
and Menu Key at the same time to enter the
hidden menu.
Install Battery (Page 4 - B)
Steps
1. Press and push the battery compartment lock
(shown in the black frame), rotate the battery
cover anticlockwise until the marks on the
battery cover and the device are aligned, and
then disassemble the battery cover.
2. Insert the battery into the battery compartment
with the positive mark inward.
3. Align the marks on the battery cover and the
device, and put the battery cover on the
battery.
4. Rotate the battery cover clockwise to fix it.
Note:
Take the batteries away if you do not use the
device for a long time.
User Manual
Legal Information
©2022 Hangzhou Microimage Software Co., Ltd.
All rights reserved.
About this Manual
The Manual includes instructions for using and
managing the Product. Pictures, charts, images
and all other information hereinafter are for
description and explanation only. The information
contained in the Manual is subject to change,
without notice, due to firmware updates or other
reasons. Please find the latest version of this
Manual at the HIKMICRO website
(www.hikmicrotech.com/).
Please use this Manual with the guidance and
assistance of professionals trained in supporting
the Product.
Trademarks
other HIKMICRO’s trademarks and
logos are the properties of HIKMICRO in various
jurisdictions.
Other trademarks and logos mentioned are the
properties of their respective owners.
DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY