HIKVISION 4 Series User Manual

- 1 -
Chapter 1 4/8 Switch Overview
The document describes the characteristics and parameters of 4/8 and gives an overview
of 4/8.
（
Note: the access line should not exceed 10m. The input voltage is less than 50V, the
maximum output power is less than 30W, the input voltage is more than 50V, and the
maximum output power is 30W.
）
1.1 Standard Configuration
4/8 series switch has two parts: 4/8 IEEE802.3af/at 100M Ethernet Base-T ports, 2 gigabit
Base-T ports.See the following table:
（
Take 8 switch as an example
）
Table 1-1 Attributes of necessary ports
Port
Features
Gigabit Ethernet ports
Optical port: 100/1000M SFP port, with LINK/ ACT
indicators
100M PoE port
Base-T port: a rate of 10/100M auto-adaptation, MDI/MDIX
auto-identification, UTP(RJ45) interface
Figure 1-1 Front template of the 8 switch

HIKVISION 4 Series Specifications

General

Brand	HIKVISION
Model	4 Series
Category	Network Router
Language	English