User Manual of HD-TVI Speed Dome
© Hikvision
The contrast function is supported by certain camera model series.
HLC
Set the value of HLC to brighten the darker area and weaken the highlight area of the image. The
greater the value is, the stronger the effect will be.
The HLC function is supported by certain camera model series.
Sharpness Compensation
Set the value of SHARPNESS COMP to automatically adjust the sharpness of the image to get a clear
image. The greater the value is, the stronger the effect will be.
Task 13: Configure the defog parameters.
When there is fog in the image, you can enable this function to get clear image.
3.3.4 Configuring Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video from being live viewed and
recorded. The masked areas can move with the panning/tilting movements and automatically adjust
the size as the lens zooming in/out.
Steps:
1. Move the cursor to enter the privacy mask configuration submenu:
MAIN MENUS > DOME SETTINGS > PRIVACY MASK
PRIVACY MASK
MASK NO. 1
MASK STATUS OFF
SET MASK
DELETE MASK
BACK EXIT
Figure 3-8 Privacy Mask Configuration Menu
2. Choose the privacy mask number:
Steps:
(1) Move the cursor to MASK NO. and click IRIS+ to enter the editing mode.
(2) Click the up and down direction buttons to select a mask number for configuration.
(3) Click IRIS+ again to confirm and exit the editing mode.
The configurable privacy mask number varies according to the camera models.
3. Configure the position and size of the privacy mask.
To Next Page
Loading...
Need help?
General
