HD-TVI Speed Dome User Manual
When there is fog in the image, you can enable this function to get clear image.
Task 14: Configure the lens initialization.
You can turn INIT LENS on to trigger a spontaneous lens initiation to ensure the normal
operation.
3.3.2 Configuring Privacy Mask
Purpose:
Focus limit enables you to cover certain areas on the live video from being live viewed and recorded.
The masked areas can move with the panning/tilting movements and automatically adjust the size
as the lens zooming in/out.
Steps:
1. Move the cursor to enter the privacy mask configuration submenu:
MAIN MENUS > DOME SETTINGS > PRIVACYS
PRIVACY BLANKS
BLANK NUM 1
BLANK STATUS OFF
SET BLANK
CLEAR BLANK
BACK EXIT
Figure 3-8 Privacy Blank Configuration Menu
2. Choose the privacy blank number:
Steps:
(1) Move the cursor to BLANK NUM. and click IRIS+ to enter the editing mode.
(2) Click the up and down direction buttons to select a mask number for configuration.
(3) Click IRIS+ again to confirm and exit the editing mode.
The configurable privacy blank number varies according to the camera models.
3. Configure the position and size of the privacy blank.
Steps:
(1) Move the cursor to SET BLANK and click IRIS+ button to enter the editing mode as shown in
the following figure. You can see the privacy blank on the live window.
To Next Page
Loading...
Need help?
General
