HIKVISION DS-2CD2632F-I(S) User Manual

Network Camera·Quick Guide
9
9 9
4
IR LED
5
Lens
6
Air Vent
7
Video Output Interface
8
Integrated Bracket
9
Reset Button
10
SD Card Slot
11
Power Interface
12
Network Interface
Notes:
 To reset the default parameters to the camera, you need to press and hold the
reset button and power on the camera. After the power on the camera, you
must still press and hold the reset button for about 10 seconds.
 The DS-2CD2612F-IS and DS-2CD2632F-IS models support audio and alarm
functions. The interfaces are shown as follows.
Figure 1-2 Audio and Alarm Interfaces
Audio
Alarm

HIKVISION DS-2CD2632F-I(S) Specifications

General

Brand	HIKVISION
Model	DS-2CD2632F-I(S)
Category	IP Camera
Language	English