HIKVISION DS-2CD2632F-I(S) User Manual

Network Camera·Quick Guide
14
14 14
1. Attach the drill template (supplied) to the wall where the camera is to be
mounted.
Drill screw holes in the wall according to the number one holes of the
drill template. Refer to the Figure 2-4.
Figure 2-4 Drilling Holes in the Wall
If you need to route cables through the wall(or ceiling), cut a cable hole
according to the drill template. Skip this step, if you want to route the cables on
the surface of the ceiling.
1
1
1
1
2
2
2
2
1:Screw Hole
for Bracket
2:Screw Hole
for Mounting
Base
Cable Hole
Screw Hole

HIKVISION DS-2CD2632F-I(S) Specifications

General

Brand	HIKVISION
Model	DS-2CD2632F-I(S)
Category	IP Camera
Language	English