EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2732F-I

HIKVISION DS-2CD2732F-I Installation Manual

HIKVISION DS-2CD2732F-I
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Installation Manual of Network Camera
92
4.4.2 Installation
Steps:
1. Drill the cable hole and the screw hole in the ceiling according to the supplied drill template.
2:Screw Hole for
Mounting Base
1:Screw Hole for
Bracket
2
1
Ceiling Mounting
2
2
2
1
1
1
Figure 4-20 The Drill Template
2. Hammer the supplied plastic expansion bolt into the screw holes.
3. Route the cables to the cable hole and connect the corresponding power cable and video cable
4. Fix the camera to the wall with the supplied screws
Adjusting
Screw
Figure 4-21 Fix the Camera to the Ceiling
5. Adjust the surveillance angle.
1). Loosen No.1 adjusting screw to adjust the panning position [0° ~ 360°].
2). Tighten No.1 adjusting screw.
3). Loosen the No.2 adjusting screw to adjust the tilting position [0° ~ 100°].
Lo-Call 1890 866 900
www.cctvireland.ie
shop@cctvireland.ie

Table of Contents

Other manuals for HIKVISION DS-2CD2732F-I

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2732F-I and is the answer not in the manual?

HIKVISION DS-2CD2732F-I Specifications

General IconGeneral
TypeIP security camera
PTZ controlYes
Placement supportedOutdoor
Connectivity technologyWired
Form factorDome
Mounting typeCeiling
Product colorWhite
Protection featuresVandal proof
International Protection (IP) codeIP66
Total megapixels3 MP
Maximum resolution2048 x 1536 pixels
Supported video modes1080p, 720p
Video formats supportedH.264, M-JPEG
Supported graphics resolutions1280 x 960, 1280 x 720 (HD 720)
Pan range0 - 360 °
Tilt angle range0 - 75 °
Angle of rotation360 °
Camera shutter speed1/30 - 1/100000 s
Minimum illumination0.095 lx
Sensor typeCMOS
Optical sensor size1/3 \
Optical zoom- x
Zoom capability-
Focal length range- mm
Password protection typeUser
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size64 GB
LED typeIR
Night vision distance20 m
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, ICMP, IGMP, SNMP, FTP, 802.1X, QoS, HTTPS
Ethernet LAN (RJ-45) ports1
DC output voltage+12V
Power source typePoE
Power consumption (max)5.5 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Height99.9 mm
Weight1000 g
Diameter140 mm

Related product manuals