HIKVISION DS-2CE11D0T-PIRLP User Manual

6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover with its body with
supplied screws on the junction box’s cover.
Figure 2-13 Combine the Junction Box’s Cover with its
Body
8. Repeat the step 5 and 6 of 2.2.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
3 Menu Description
Please follow the steps below to call the menu.
Note:
The menu description part is only for your reference. It
might have differences due to the specific model that
you have.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
Camera
TVI DVR
Monitor
Figure 3-1 Connection
2. Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking button, or call
the preset No. 95.

HIKVISION DS-2CE11D0T-PIRLP Specifications

General

Brand	HIKVISION
Model	DS-2CE11D0T-PIRLP
Category	Security Camera
Language	English