HIKVISION DS-2CE11D0T-PIRLP User Manual

6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the surveillance angle.
1
2
3
Pan Position
[0° to 360°]
Tilt Position [0° to 180°]
Rotation Position
[0° to 360°]
Figure 2-10 3-Axis Adjustment
1) Loosen the No.1 adjusting screw to adjust the pan
position [0° to 360°]. Tighten the No.1 adjusting
screw.
2) Loosen the No.2 adjusting screw to adjust the
tilting position [0° to 180°]. Tighten the No. 2
adjusting screw.
3) Loosen the No.3 adjusting screw to adjust the
rotation position [0° to 360°]. Tighten the No.3
adjusting screw.
2.2.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box separately.
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Figure 2-11 Drill Template
Note:
Drill the cable hole, when adopting ceiling outlet to
route the cable.
3. Take apart the junction box, and align the screw
holes of the bullet camera with those on the
Junction box’s cover.
4. Fix the camera on the junction box’s cover with
three supplied screws.
Junction Box
Cover
Figure 2-12 Install the Junction Box
5. Secure the junction box’s body with supplied screws
on the ceiling/wall.

HIKVISION DS-2CE11D0T-PIRLP Specifications

General

Brand	HIKVISION
Model	DS-2CE11D0T-PIRLP
Category	Security Camera
Language	English