UM DS-2CE7xH0T-ITxxx Series Turret 052020NA 18
Figure 23, Manual Mode
4.4.3
Brightness
Brightness refers to the brightness of the image.
You can set the brightness value to darken or
brighten the image. The higher the value, the brighter
the image.
4.4.4
Contrast
This feature enhances the difference in color and
light between parts of an image.
4.4.5
Sharpness
Sharpness determines the amount of detail an
imaging system can reproduce.
4.4.6
Saturation
Saturation is the proportion of pure chromatic color in
the total color sensation. The saturation of a color is
determined by a combination of light intensity and
how much it is distributed across the spectrum of
different wavelengths.
4.4.7
DNR (Digital Noise Reduction)
The DNR function can decrease the noise effect,
especially when capturing moving images in poor
light conditions and delivering more accurate and
sharper images.
4.4.8
Mirror
OFF, H, V, and HV are selectable for mirror.
•
OFF: The mirror function is disabled.
•
H: The image is flipped 180° horizontally.
•
V: The image is flipped 180° vertically.
•
HV: The image is flipped 180° both horizontally and
vertically.
4.5
Factory Default
Move the cursor to Factory Default and click Iris+ to
reset all the settings to the factory defaults.
MODE
WHITE BALANCE
R-GAIN
5
5
MANUAL
B-GAIN
BACK
EXIT
SAVE & EXIT
To Next Page
Loading...
Need help?
General
