© Hikvision
Figure 4-3 Start Live View
Table 4-1 Descriptions of the Toolbar and Live View Parameters
Click the button to enable Pixel Counter. Draw an area in live view
window, and it shows the height and width of the selected area.
Manually capture the pictures.
Manually start/stop recording.
Steps:
1. Click the button to enable Digital Zoom function.
2. Draw a rectangle on the image as the target area, and the area will
be zoomed in.
3. After viewing, you can click any place of the picture to get back to
normal picture.
Steps:
1. Click the button to enter the regional exposure operation mode.
2. Draw a rectangle on the image as target exposure region.
Steps:
1. Click the button to enter the regional focus operation mode.
2. Draw a rectangle on the image as the target focus region.
Mute/audio on and adjust volume
To Next Page
Loading...
Need help?
General
