Click , then the lens focuses far
and the object far away gets clear.
Click , then the lens focuses near
and the object nearby gets clear.
When the image is too dark, click
to enlarge the iris. When the
image is too bright, click to
stop down the iris.
Refer to Section 4.5.2 Auxiliary
Functions for detailed information of
auxiliary functions
Adjust speed of pan/tilt movements.
Refer to Section 4.5.3
Setting/Calling a Preset for detailed
information of setting preset.
Refer to Section 4.5.4
Setting/Calling a Patrol for detailed
information of setting patrol.
Refer to Section 4.5.6
Setting/Calling a Pattern for
detailed information of setting
pattern.
Buttons on the Preset/Patrol/Patterns interface:
Table 4-3 Descriptions of Buttons
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.