Thermal & Optical Bi-spectrum Network Camera User Manual
78
● If you set the reminding day before expiration to 1, and the detection time to 10:00, and the
certificate will expire in 9:00 the next day, the camera will remind you in 10:00 the first day.
3. Click Save.
12.13.5 Control Timeout Settings
If this function is enabled, you will be logged out when you make no operation (not including
viewing live image) to the device via web browser within the set timeout period.
Go to Configuration → System → Security → Advanced Security to complete settings.
12.13.6 Set SSH
SSH is a protocol to ensure security of remote login. This setting is reserved for professional
maintenance personnel only.
Steps
1. Go to Configuration → System → Security → Security Service.
2. Check Enable SSH.
3. Click Save.
12.13.7 Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS.
2. Check Enable.
3. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
4. Select a server certificate.
Note
● Complete certificate management before selecting server certificate. Refer to Certificate
Management for detailed information.
● If the function is abnormal, check if the selected certificate is abnormal in Certificate
Management.
5. Click Save.
12.13.8 Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by setting
To Next Page
Loading...
Need help?
General
