HIKVISION DS-2TD6537T-50H4LX/W User Manual

Thermal Network Positioning System·Quick Start Guide
6
Figure 3-2 Cables of Positioning Systems
3.3 Alarm In/Out Connections
This section is only for the positioning system with alarm in/out functions.
The positioning system can be connected with alarm inputs (0~5VDC) and alarm outputs.
Refer to the following diagrams for alarm output:
JQC-
3FG
Relay
30VDC
GND OUT
L N
～
220V AC
Relay Output
(10A 250VAC)
Diagram (left)
Diagram (right)
1A
OUT(n)
OUT(n)
+
-
DC
DC Load
Relay Output
Positioning System
OUT(n)
OUT(n)
Positioning System
Figure 3-3 Alarm Out Connections
The alarm provides the relay output (no voltage), and the external power supply is
required when it connects to the alarm device.

For DC power supply (left diagram), the input voltage must be no more than 30VDC,
1A.

HIKVISION DS-2TD6537T-50H4LX/W Specifications

General

Brand	HIKVISION
Model	DS-2TD6537T-50H4LX/W
Category	Security System
Language	English