HIKVISION DS-2TD6537T-50H4LX/W User Manual

Thermal Network Positioning System·Quick Start Guide
13
Figure 1-9 Disassemble the Junction Box
7. Connect the cables.
1). Route the camera cables through the top cable gland and insert them into the
junction box.
2). Route the external cables through the bottom cable gland and insert them into the
junction box.
3). Poke through the sealing ring, and use the sealing rings to cover the cables.
4). Connect the power cables with the connector, and then connect the video cables.
Sealing Ring
Top Cable
Gland
Sealing Ring
Bottom
Cable Gland
Figure 1-10 Connect Cables
8. Connect the junction box and explosion-proof tube with cable glands.
9. Cover the junction box with the screws.
Figure 1-11 Cover the Junction Box

HIKVISION DS-2TD6537T-50H4LX/W Specifications

General

Brand	HIKVISION
Model	DS-2TD6537T-50H4LX/W
Category	Security System
Language	English