13.1
In the point-to-
point working scenario, user can configure one
AP, and another to station mode, shown in
To make the above network work, user need to use computers to configure the 2
devices, and the detail configurations are described in the following:
1
Configure the 2 DS-
set different LAN IP for the 2 devices.
2
In wireless menu, configure the 2 devices to AP and station sep
SSID, the same channel bandwidth (20MHz for default), and set the same
encryption and password for both of the devices.
3
After the above setting is done, using one computer to ping the IP address of the
other computer, if they are con
Status page.
DS-3WF03C-D
Outdoor Video Wireless Network
42
point working scenario, user can configure one
DS-
AP, and another to station mode, shown in
figure.
Figure 13-1 AP and Station network
To make the above network work, user need to use computers to configure the 2
devices, and the detail configurations are described in the following:
-D
devices to bridge mode, and disable the firewall, and
set different LAN IP for the 2 devices.
In wireless menu, configure the 2 devices to AP and station sep
SSID, the same channel bandwidth (20MHz for default), and set the same
encryption and password for both of the devices.
After the above setting is done, using one computer to ping the IP address of the
other computer, if they are con
nected, user can watch the connection status in the
Outdoor Video Wireless Network
Bridge
-D device to
To make the above network work, user need to use computers to configure the 2
devices to bridge mode, and disable the firewall, and
SSID, the same channel bandwidth (20MHz for default), and set the same
After the above setting is done, using one computer to ping the IP address of the
nected, user can watch the connection status in the