User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
30
Below is the table that reflects the relationship between ingress rate limit and burst.
Ingress Throughput when reach stable
Rate Limit(kbps) Burst(Kbytes) Mbps
Description
10000
0
29.587
Unlimited
10000
10
4.286
Stable
10000
100
8.037
Oblique up to stable
10000
1000
8.825
From 9.5 down to stable
10000
10000
8.6
From 28.5 down to stable
10000
40000
8.6
Hold on 10 seconds at 29.6, then
suddenly down to stable
The relationship of rate and burst for egress:
Set burst less than 1/10 of rate limit, the rate curve is stable totally
Set burst larger than rate limit, the rate curve will hold a while at a higher value
then down to stable
Below is the table that reflects the relationship between egress rate limit and burst.
Egress Throughput when reach stable
Rate Limit(kbps) Burst(Kbytes) Mbps
Description
20000
0
18.853
Stable
20000
20
19.021
Stable
20000
200
19.205
Stable
20000
2000
19.437
From 23.5 down to stable
20000
20000
19.2
Hold on 20 seconds at 24.5, then
suddenly down to stable
20000
80000
19.2
Hold on several minutes at 24.5,
then suddenly down to stable
7.8 VLAN Settings
The VLAN function allows user to create multiple virtual local area network. As show
below, we add a VLAN on port ath0. The VLAN ID is 10. The range of VLAN ID is 2~4094.
Each VLAN ID represents a different VLAN.