HIKVISION DS-7108HQHI-K1 Quick Start Guide

Digital Video Recorder Quick Start Guide
9
Enter the password in Create Channel Default Password to activate the network camera(s) connected to
the device.
Click OK to save the password and activate the device.
Set Admin Password
What to do next:
 When you have enabled Reserved E-mail Settings, continue to set the reserved email for the future
password resetting.
 When you have enabled Export GUID, continue to export the GUID file to the USB flash drive for the future
password resetting.
 When you have enabled Security Question Configuration, continue to set the security questions for the
future password resetting.
Set Unlock Pattern
For the Admin user, you can configure the unlock pattern for device login.
Use mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is
done.

The pattern shall have 4 dots at least.

Each dot can be connected for once only.
Draw the same pattern again to confirm it.

HIKVISION DS-7108HQHI-K1 Specifications

General

BNC input ports	1
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Power consumption (typical)	12 W
Voltage	12 V
Product color	White
Rack capacity	1U
Audio output channels	1.0 channels
Video compression formats	H.264, H.264+, H.265, H.265+
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	200 x 200 x 45 mm