HIKVISION DS-7108HQHI-K1 Quick Start Guide

Digital Video Recorder Quick Start Guide
10
Draw the Unlock Pattern
User Login
You have to log in to the device before operating the menu and other functions.
Select User Name.
Enter password for the selected user.
Click OK to log in.
For the admin, if you have entered the wrong password for 7 times, the account will be locked for 60 seconds.
For the operator, if you have entered the wrong password for 5 times, the account will be locked for 60
seconds.
User Logout, Shutdown and Reboot
You can log out of the system, shut down, or reboot the device.
Click on the menu bar.
Click Logout, Shutdown, or Reboot as your desire.
Network Settings
Configure General Settings
You shall properly configure the network settings before you operate DVR over network.
Go to System > Network > TCP/IP.
Set the network general parameters.
Click Apply to save the settings.

HIKVISION DS-7108HQHI-K1 Specifications

General

BNC input ports	1
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Power consumption (typical)	12 W
Voltage	12 V
Product color	White
Rack capacity	1U
Audio output channels	1.0 channels
Video compression formats	H.264, H.264+, H.265, H.265+
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	200 x 200 x 45 mm