Digital Video Recorder Quick Start Guide
14
If the power consumption of the DVR is higher than that of the AF camera and lower than that of the
AT camera, when AF camera is connected, it is powered on normally; when AT camera is connected,
the live view image will notify insufficient power for PoC.
Check the connected AF or AT camera number and the connectable camera number.
Only Hikvision PoC camera is supported.
The maximum connectable AT/AF camera number varies according to different models.
Please turn off the PoC function if the camera does not support PoC, or the camera is not produced by
Hikvision. Otherwise, it may result in permanent damage to the camera or DVR.
Live View
Enter the live view mode ( ).
You can select a window and double click a camera from the list to play the video from the camera in the
selected window.
Use the toolbar at the playing window bottom to achieve functions of capture, instant playback, audio
on/off, digital zoom, live view strategy, show information and start/stop recording.
Recording Settings
Before you start
Make sure that the disk has already been installed. If not, please install a disk and initialize it. You may refer to
the user manual for detailed information.
In the live view mode, select a connected camera window and click at the toolbar to start recording.
Playback
The recorded video files and pictures on HDD can be played back. Refer to the user manual for details of each
playback mode.
Go to Playback.
Check the channel(s) in the channel list.
Double click a date on the calendar.
(Optional) Use the toolbar in the bottom to control the playing progress.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
