EasyManuals Logo

HIKVISION DS-7200 User Manual

HIKVISION DS-7200
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background image
User Manual of DS-7200/7300/8100 Series DVR
136
8.3 Detecting Video Loss
Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface of Camera Management.
Menu> Camera> Video Loss
Figure 8. 12 Video Loss Setup Interface
2. Select a channel you want to detect.
3. Check the checkbox of Enable Video Loss Alarm.
4. Click the icon of Settings to enter the Settings interface.
5. Set the arming schedule and alarm response actions. Please refer to Step4 and Step5 of Chapter 8.1
Setting up Motion Detection Alarm.
Figure 8. 13 Set Arming Schedule of Video Loss
6. Click Apply to save the video loss alarm settings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7200 and is the answer not in the manual?

HIKVISION DS-7200 Specifications

General IconGeneral
Hard Disk1 SATA interface
Video Input4/8/16 channels
Video Output1 HDMI, 1 VGA
Audio Output1 channel, RCA
HDD CapacityUp to 6TB
Network ProtocolsTCP/IP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP
Network Interface1 RJ45 10M/100M adaptive Ethernet interface
USB Interface2 USB 2.0
Working Temperature-10 °C to 55 °C (14 °F to 131 °F)
Video CompressionH.264+
Encoding Resolution1080p/720p/4CIF/CIF

Related product manuals