User Manual of DS-7200/7300/8100 Series DVR
179
Figure 10. 13 Set HDD Property
3. Set the HDD property to R/W, Read-only or Redundancy.
4. Click the OK button to save the settings and exit the interface.
5. In the HDD Information menu, the HDD property will be displayed in the list.
At least 2 disks (HDD or network disk) must be installed or connected on your device when you want to set a
HDD to Redundancy, and there is one HDD with R/W property.
To Next Page
Loading...
Need help?
General