HIKVISION DS-7208HGHI-K1 User Manual

2.
Choose one day of a week and set the me segment. Up to eight me periods can be set within
each day.
Note
Time periods shall not be repeated or overlapped.
Figure 5-10 Set Arming Schedule
3.
Click Apply.
5.6 Recording Management
5.6.1 Storage Device
Inialize HDD
A newly installed hard disk drive (HDD) must be inialized before it can be used to save videos and
informaon.
Before You Start
Install at least an HDD to your video recorder. For detailed steps, refer to Quick Start Guide.
Steps
1.
Go to
Conguraon → Record → Storage .
2.
Select an HDD.
3.
Click Init.
Repair Database
Repair an HDD that with error in database. Please operate it with the help of professional
technical support.
Secure Erase
Digital Video Recorder User Manual
30

HIKVISION DS-7208HGHI-K1 Specifications

General

DC voltage	12 V
Power consumption (typical)	17 W
Ethernet LAN	Yes
Number of users	64 user(s)
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Audio system	2-way
Product color	Black
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro, H.265 Pro+
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
HDD interface	SATA, SATA II, SATA III
Maximum HDD capacity	4000 GB

Weight and Dimensions

Depth	222 mm
Width	260 mm
Height	45 mm
Weight	1000 g