Face Picture Comparison
Face picture comparison compares the detected face pictures with face pictures in the face picture
library. The device will trigger an alarm when comparison succeeded.
Before You Start
Ensure you have created at least one face picture library, and face pictures are added to the library.
Refer to
Face Picture Library Management for operaon details.
Steps
1.
Go to
Conguraon → Face Recognion → Face Picture Comparison .
Figure 6-24 Face Picture Comparison
2.
Select a camera.
3.
Turn on Enable.
4.
Select the face picture library (or libraries) in List Library Linkage.
5.
Set the face picture library similarity.
Similarity
Similarity value ranges from 0 to 100. Device will analyze the similarity between the detected
face picture and face pictures in the library. When the similarity reaches the threshold value,
the face picture comparison succeeded, and the face picture is recognized.
6.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
7.
Set the linkage acons for Linkage Succeeded and Linkage Failed. Refer to Congure Alarm
Linkage Acon for details.
Linkage Succeeded
The device will perform linkage acons when the face picture comparison succeeded.
Linkage Failed
The device will perform linkage acons when the face picture comparison failed.
Digital Video Recorder User Manual
66