1 C O N N E C T D E V I C E S
1. Connect AC cord to the DVR and plug into 110 VAC outlet (surge suppressor is recommended).
2. Connect DVR to LAN using Cat 5e (or better) cable.
3. Connect video monitor(s) to DVR using HDMI and/or VGA cables, as appropriate.
4. Connect mouse to USB port.
5. Connect to audio I/O using RCA connectors.
2 S T A R T T H E D V R
Plug power cord into A.C. outlet. Power indicator LED will illuminate to indicate unit is starting.
1. Turn Power Switch located on back panel on.
2. Press On/Off Switch located on front panel on. After startup, power indicator LED will remain
illuminated.
3 L O C A L A C T I V A T I O N
System access requires a secure, user-assigned password.
1. First-time access requires user to create an
admin password.
2. Input the same password in the Create New
Password and Confirm New Password
text fields.
Strong Password REQUIRED
Password must contain 8 to 16 characters,
combining numbers, lower and upper case
letters, and special characters. At least two
types of the above-mentioned characters
are required. Risky passwords, as
determined by the system, are not allowed.
Also, reset password regularly.
3. Click OK to save password and activate
device.
Log In
1. User Name field will be prefilled with
“admin.”
2. Input Password (default = wrong password
7 x locks account for 30 minutes; can be
changed in setup).
3. Click OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
