HIKVISION DS-7608NI-E2/8P Quick Start Guide

www.hikvision.com/en/us
Go to:
“MENU”>”CAMERAS SETUP”
ADDING IP CAMERAS
6. ADDING IP CAMERAS
“REFRESH”
to find cameras
connected to the
network
List of detected
cameras (YELLOW)
List of added
cameras (WHITE)
Press “+” to add the
camera to the NVR
Press the “MINUS” icon to
delete an added camera
Please refer to
the manual for
detailed
information
 Please note: To change the CAMERA NAME go to OSD
Press “EDIT”
to change the camera’s IP
address.

HIKVISION DS-7608NI-E2/8P Specifications

General

Display modes	Live view
Maximum frame rate	60 fps
Maximum resolution	1920 x 1080 pixels
Alarm input channels	4
Video input channels	8 channels
Alarm output channels	1
Resolution at capture speed	1920x1080@60fps
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100 - 240 V
Power consumption (typical)	10 W
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	9
HDD interface	Serial ATA
Maximum storage capacity	12 TB
Number of HDDs supported	2
Total installed storage capacity	0 GB

Weight and Dimensions

Depth	290 mm
Width	445 mm
Height	45 mm
Weight	1000 g