Network Video Recorder User Manual
157
16.5 Network Detection
16.5.1 Network Traffic Monitoring
Network traffic monitoring is the process of reviewing, analyzing and managing network traffic for
any abnormality or process that can affect network performance, availability and/or security.
Steps
1. Go to Maintenance → Network → Traffic.
2. You can view the real-time network traffic status, including MTU (Maximum Transmission Unit),
and network throughput.
Figure 16-2 Network Traffic
16.5.2 Test Network Delay and Packet Loss
Network delay is caused by slow response of the device when oversized data information is not
limited during transmission under certain network protocol, e.g. TCP/IP. Packet loss test is for
testing network packet loss rate that is the ratio of lost data packet and total number of
transmitted data packet.
Steps
1. Go to Maintenance → Network → Network Detection.
2. Select a network card in Select NIC.
3. Enter the destination IP address in Destination Address.
To Next Page
Loading...
Need help?
General
