EasyManuals Logo
Home>HIKVISION>Network Hardware>DS-9608NI-ST

HIKVISION DS-9608NI-ST User Manual

HIKVISION DS-9608NI-ST
269 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #178 background imageLoading...
Page #178 background image
User Manual of Network Video Recorder
177
4. Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of
the camera list, as shown in the Figure 11. 34.
Configuration > Remote Configuration > Camera Management > IP Camera
Figure 11. 34 Connect to IP Camera
5. Click the link and the page of IP camera management appears.
11.2.14 Configuring Telnet
Purpose:
Telnet function provides an easy way to get access to the NVR. You can see the advanced information about the
device by inputting command; as well the configuration can also be realized through telnet connection.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 11. 33.
Configuration > Remote Configuration > Network Settings > Advanced
2. Check the checkbox of the Enable Telnet.
3. Click the Save button to save the setting.
4. You can open the Command Prompt window in your PC, and input telnet IP Address to connect with the
NVR, as shown in the figure below.
Example:
If the IP address of the NVR is 192.0.0.64, you can input telnet 192.0.0.64 and then press Enter to connect
to the NVR.
Figure 11. 35 Connect to NVR
The telnet function turns invalid after the device shutting down or rebooting, you have to enable it again if

Table of Contents

Other manuals for HIKVISION DS-9608NI-ST

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-9608NI-ST and is the answer not in the manual?

HIKVISION DS-9608NI-ST Specifications

General IconGeneral
BrandHIKVISION
ModelDS-9608NI-ST
CategoryNetwork Hardware
LanguageEnglish

Related product manuals