HIKVISION DS-9608NI-ST User Manual

User Manual of Network Video Recorder
216
14.4 Managing HDD Group
14.4.1 Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced > Storage Mode
2. Set the Mode to Group, as shown in Figure 14. 13.
Figure 14. 13 Storage Mode Interface
3. Click the Apply button and the following Attention box will pop up.
Figure 14. 14 Attention for Reboot
4. Click the Yes button to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
Menu > HDD> General
6. Select HDD from the list and click icon to enter the Local HDD Settings interface, as shown in Figure
14. 15.
Figure 14. 15 Local HDD Settings Interface

HIKVISION DS-9608NI-ST Specifications

General

Brand	HIKVISION
Model	DS-9608NI-ST
Category	Network Hardware
Language	English