Quick Start Guide of Network Video Recorder
31
3. Install the plug-in before viewing the live video and managing the camera. Please follow the installation
prompts to install the plug-in.
You may have to close the web browser to finish the installation of the plug-in.
Live View
The live view interface appears by default when you log in the device.
The live view interface may differ according to different models.
Interface Introduction
Displays the list of channels and the playing and recording status of each
channel.
Displays the image of channel, and multi-window division is supported.
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and
calling.
PTZ function can only be realized if the connected camera supports PTZ control.
Start Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the button on the toolbar to start the live view of all cameras on the device list.
Refer to the following table for the description of buttons on the live view window:
To Next Page
Loading...
Need help?
General
