HIKVISION DS-K2601 User Manual

DS-K2600 Series Access Controller
39
6.2 Activation via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software
according to the prompts. Follow the steps to activate the control panel.
Steps:
1. Run the client software and the control panel of the software pops up, as shown in the
figure below.
Figure 1-3 Control Panel Interface
2. Click the Device Management to enter the Device Management interface.
3. Check the device status from the device list, and select an inactive device.

HIKVISION DS-K2601 Specifications

General

Product type	Access controller
Certification	CE, FCC
Product color	Gray
Brand compatibility	Hikvision
Operating temperature (T-T)	-20 - 65 °C

Weight and Dimensions

Depth	370 mm
Width	345 mm
Height	90 mm