Figure 4-2 Installing the Plate
3. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks
into the slots on the rear panel of the indoor station, during which the lock catch will
be locked automatically.
Figure 4-3 Hooking the Indoor Station to the Plate
For the installation without the junction box, you should fix the wall mounting plate to
the wall with 2 expansion screws first, and then hook the indoor station.
4.2 Door Station Installation
To install the door station, the wall mounting shield is required.
The dimension of the wall mounting shield is shown in Figure 4-4.
To Next Page
Loading...
Need help?
General
