HIKVISION DS-KV8102-1C User Manual

Video Intercom Door Station·User Manual
11
4. Attach the installation plate to the gang box and align the screw holes of the
installation plate with the screw holes of the gang box.
5. Insert 2 PA4 screws and a KA4 screw into the screw holes to fix the installation plate
onto the gang box.(The KA4 screw is optional.)
PA4 Screws
KA4 Screw
Figure 5-7 Attach the Installation Plate
6. After installing the installation plate, install the door station by inserting the rear
component into the hollow area of the installation plate.
While inserting the door station into the installation plate, incline the device by 5~10°,
as shown in the figure below.
Hollow Area
Rear Component
Figure 5-8 Install the Door Station

HIKVISION DS-KV8102-1C Specifications

General

Brand	HIKVISION
Model	DS-KV8102-1C
Category	Intercom System
Language	English